Panasonic DMC-LZ7, DMC-LZ6 operating instructions Printing the Pictures

Connecting to other equipment

Printing the Pictures

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to print and start printing on the camera’s screen.

Set print settings such as the print quality on the printer beforehand. (Read the printer operating instructions.)

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC6PP; optional)

•It may take time to print some pictures. Use batteries with sufficient battery power (P23) or the AC adaptor (DMW-AC6PP; optional) when you connect to a printer.

•Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-AC6PP; optional).

1 Turn on the camera and the printer.

2 Set the mode dial to [].

88

3 Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket.

•Hold the USB connection cable at C and insert straight in or take straight out.

•If the mode dial is not set to [] when the camera is connected to the PC,

disconnect the USB connection cable, set

the mode dial to [] and then connect the USB connection cable again.

(Depending on the printer, it may be necessary to turn it off and then on again.)

•Do not use any other USB connection cables except the supplied one.

•If a card is not inserted when the camera is connected to the PC, you can edit or access the picture data on the built-in memory. If a card is inserted, you can edit or access the picture data on it.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•If you want to print the age in [BABY1]/ [BABY2] (P49) or [PET] (P50) in scene mode or the number of days that have passed since the departure date for [TRAVEL DATE] (P55), use the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

VQT1C39