Panasonic DMC-LZ6, DMC-LZ7 - page 101

Others

101

VQT1C39

9:A vertical reddish line appears on the

LCD monitor while the shutter butt on

is pressed halfway or recording

motion pictures.

•This is a phenomenon

called smear. It is a

characteristic of CCD

and appears when the

subject has a bright

part. Black or green

vertical lines may also appear or

uneven colors may appear around the

smear. This is not a malfunction. It is

recorded in motion pictures but is not

recorded on still pictures.

10: Motion picture recording stops in

the middle.

•Are you using a MultiMediaCard?

–This unit does not suppor t

MultiMediaCards.

•When you set the picture quality to

[30fpsVGA] or [30fps16:9], we

recommend using a High Speed SD

Memory Card with “10MB/s” or greater

displayed on the package.

•Depending on the type of SD Memory

Card or SDHC Memory Card, recording

may stop in the middle.

∫LCD monitor

1:The LCD monitor is turned off

sometimes when the camera is turned

on.

•Is the LCD monitor turned off soon after

you take pictures with the flash?

–While the flash is being charged, the

LCD monitor is turned off.

2:The LCD monitor becomes darker or

brighter for a moment.

•This phenomenon appears when you

press the shutter button halfway to set

the aperture value and does not affect

the recorded pictures.

3:The LCD monitor flickers indoors.

•The LCD monitor may flicker for a few

seconds after turning the camera on

indoors under fluorescent light.

This is not a malfunction.

4:The LCD monitor is too bright or dark.

•Adjust the brightness of the screen.

(P21)

•Is the camera in high angle mode?

(P37)

5:Black, red, blue and green dots

appear on the LCD monitor.

•These pixels do not affect the recorded

pictures.

This is not a malfunction.

6:Noise appears on the L CD monitor.

•In dark places, noise may appear to

maintain the brightness of the LCD

monitor.

This does not affect the pictures you are

recording.

VQT1C39ENG.book 101 ページ２００６年１２月２１日　木曜日　午前１０時５７分

Contents

Main Operating Instructions DMC-LZ6 Information for Your Safety WARNING: CAUTION Page Page OK Contents Before Use Preparation Basic Advanced (Recording pictures) Advanced (Playback) Connecting to other equipment Others Standard Accessories Names of the Components 1 DMC-LZ7 2 VFC4090 45 10 11 12 13 1514 6 7 8 20 Quick Guide 1Insert the batteries. (P15) 2Turn the camera on to take pictures. 3Play back th e pictures. About the Batteries Page Page Page Inserting and Removing the Batteries/the Card (Optional) About the Built-in Memory/the Card (optional) Setting Date/Time (Clock Set) 2Press 3 4 2 1 to select the date and time. 3Press [MENU/SET] to set. 3 : : About the Mode Dial B Setting the Menu 1Press 3/4 to select the menu item. 4Press [MENU/SET] to set. 2Press 1. 3Press 3/4 to select the setting. About the Setup Menu Page Page LCD Monitor Display/ Switching the LCD Monitor Display Taking Pictures Page Page Taking Pictures in Simple Mode 2Press 3/4 to select the desired menu item and then press 1. 3Press 3/4 to select the desired setting and then press 4Press [MENU/SET] to close the Press 3. Taking Pictures with the Zoom Rotate the zoom lever towards Tele. Rotate the zoom lever towards Wide. Using the Optical Zoom/Using the Extended Optical Zoom (EZ) Using the Easy zoom 2Press 3/4 to select [D.ZOOM] 3Press 4 to select [ON] and then Press [MENU/SET] to close the menu. Using the Digital Zoom Further extending the zoom Checking the Recorded Picture (Review) 1Press 4 [REV]. 2Press 2/1 to select the picture. 1Rotate the zoom lever towards [ ] [T]. 2Press 3/4/2/1 to move the position. Playing Back/Deleting Press 2/1 to select the picture. 1Press [ ] while the picture is being played back. 2Press 3 to select [YES] and then 1Press [ ] twice. Press 4Press [ ]. to select [MULTI DELETE] or [ALL DELETE] 3Press 2/1 to select the picture and then press 4 to set. About the LCD Monitor Press [DISPLAY] to change. Changing the information displayed Page Press [HIGH ANGLE] A for 1 second. B Recording a picture with the camera held high above your head (High angle mode) Taking Pictures using the Built-in Flash 1Press 1 []. 2Press 3/4 to select a mode. Page Page Page Taking Pictures with the Self-timer 1Press 2 []. 2Press 3/4 to select a mode. 4Press the shutter button halfway to focus and then press it fully to take the picture. Compensating the Exposure 1Press 3 [ ] until [EXPOSURE] appears and compensate the exposure with 2/1. 2Press [MENU/SET] to finish. Changing the sensitivity according to the movement of the subject being recorded 2Press 3/4 to select [ISO LIMIT] 3Press 3 4 to select the item and 1/125 ISO800 1/30 ISO200 Taking Close-up Pictures T W Taking pictures that match the scene being recorded (Scene mode) 1Press 1 for the [SCENE MODE] 2Press 3/4/2/1 to select the scene mode. 3Press [MENU/SET] to set. [PORTRAIT] [SOFT SKIN] [SCENERY] [SPORTS] [NIGHT PORTRAIT] [NIGHT SCENERY] [FOOD] [PARTY] [CANDLE LIGHT] [SUNSET] [BABY1]/ [BABY2] [PET] [HIGH SENS.] [BEACH] [STARRYSKY] [FIREWORKS] [SNOW] [AERIAL PHOTO] Motion Picture Mode 1Press the shutter button halfway to focus and then press it fully to start recording. 2Press the shutter button fully to stop recording. 2Press 3/4 to select [ASPECT RATIO] and then press 1. 3Press 3/4 to select the item and 6Press [MENU/SET] to close the Recording which Day of the Vacation You Take the Picture 5Press 3/4/2/1 to select the departure date and then press 6Press 3/4/2/1 to set the return date and then press [MENU/SET]. 7Press [MENU/SET] to close the 8Take a picture. Displaying the Time at the Travel Destination (World Time) 1 , 2, 3 Using the [REC] Mode Menu 1Press and hold [FUNC] when recording. 2Press 3/4/2/1 to select the menu item and the setting and then press [MENU/SET] to close B C [W.BALANCE] Adjusting the hue for a more natural picture 2Press [MENU/SET] to finish. [SENSITIVITY] Setting the light sensitivity [ASPECT RATIO] Setting the aspect ratio of pictures [PICT.SIZE]/[QUALITY] Setting a picture size and quality that match your use of the pictures [AF MODE] Setting the focus method [STABILIZER] Detecting jitter and compensating for it [BURST] Taking pictures using burst [AF ASSIST LAMP] Focusing in low light conditions becomes easier [SLOW SHUTTER] Recording bright pictures in dark places [COL.MODE] color Setting Displaying Multiple Screens 1Rotate the zoom lever towards [ ] [W] to display multiple screens. 2Press 3/4/2/1 to select a picture. Displaying Pictures by Recording Date (Calendar Playback) 1Rotate the zoom lever several times towards [ ] [W] to display the calendar screen. 2Press 3/4/2/1 to select the date to be played back. 3Press [MENU/SET] to display the pictures that were recorded on the selected date. Using the Playback Zoom 1Rotate the zoom lever towards [ ] [T] to enlarge the picture. 2Press 3/4/2/1 to move the position. Playing Back Motion Using the [PLAY] mode menu 2Press 3/4 to select the menu item and then press 1. 1Press 3/4 to select [ALL] or [ ] 2Press 3 to select [START] and 3Press 4 to finish. [SLIDE SHOW] Playing back pictures in order for a fixed duration 1Press 4 to select [ON] and then 2Press [MENU/SET] to close the 3Press 2/1 to select the picture then press 3. 1Press 4 to select [ON] and then [FAVORITE] Setting your favorite pictures [ROTATE DISP.]/[ROTATE] To display the picture rotated 2Press [MENU/SET] to close the 1Press 2/1 to select the picture 2Press 3/4 to select the direction to rotate the picture and then 3Press [MENU/SET] twice to close Press 3/4 to select [SINGLE] or [MULTI] and then press 1Press 2/1 to select the picture 4Press 3/4 to select [YES] or [DATE STAMP] Imprinting information such as t he date on the recorded pictures 5Press [MENU/SET] twice to close 1Press 2/1 to select the picture and then press 4 to SET/ CANCEL. 2Press [MENU/SET]. Press 3/4 to select [SINGLE], [MULTI] or [CANCEL] and then 1Press 2/1 to select the picture to print and then press 3/4 to set the number of prints. 2Press [MENU/SET] twice to close 1Press 2/1 to select the picture to print then press 3/4 to set the number of prints. 2Press [MENU/SET] twice to close Page Press 3/4 to select [SINGLE], [MULTI] or [CANCEL] and then 1Press 2/1 to select the picture and then press 4 to SET/CANCEL. 2Press [MENU/SET] twice to close [PROTECT] Preventing accidental erasure of pictures 1Press 2/1 to select the picture 2Press 2/1 to select the size and then press 4. 3Press 3/4 to select [YES] or 4Press [MENU/SET] twice to close [RESIZE] 1Press 2/1 to select the picture 2Enlarge or reduce the parts to be trimmed with the zoom lever. 3Press 3/4/2/1 to move the position of the part to be trimmed. 4Press shutter button. 5Press 3/4 to select [YES] or 1Press 3/4 to select the copy destination and then press 2Press 2/1 to select the picture 3Press 3 to select [YES] and then 4Press [MENU/SET] several times to close the menu. [COPY] Press 3 to select [YES] and then [FORMAT] Initializing the built-in memory or a card Connecting to a PC 100_PANA 101_PANA 999_PANA DCIM 100_PANA MISC P1000001.JPG P1000002.JPG P1000999.JPG Page Printing the Pictures 1Turn on the camera and the printer. 2Set the mode dial to [ ]. 3Connect the camera to a printer via the USB connection cable A (supplied). 1Press 2/1 to select the picture 2Press 3 to select [PRINT START] 1Press 3. 3Disconnect the USB connection cable after printing. 2Press 3/4 to select an item and 3Press 3 to select [PRINT START] 4Disconnect the USB connection cable after printing. Page Playing Back Pictures on a TV Screen 1Connect the AV cable A (supplied) to the [AVOUT] socket on the camera. 2Connect the AV cable to the video input and the audio input sockets on the TV. 3Turn the TV on and select external input. 4Turn the camera on. Screen Display AIn recording R1 1X BRecording in simple mode CIn playback Cautions for Use Page Message Display Page Troubleshooting Page Page Page Page Page Number of Recordable Pictures and Available Recording Time Page Available recording time (when recording motion pictures) Specifications Page Digital Camera Accessory System Accessory# Description Semi Hard Case AC Adaptor NOTE: Accessories and/or model numbers may vary between countries. Consult your local dealer. Digital Camera Accessory Order Form (For USA Customers) In CANADA, please contact your local Dealer for more information about accessories. Request for Service Notice Request for Service Notice: (USA Only) Limited Warrant y Panasonic Digital Still Camera Limited Warranty Page Customer Services Directory Web Site: http://www.panasonic.com/consumersupport MAIL TO : 1-800-272-7033 Product Repairs Prcautions prendre (pour le Canada) AVERTISSEMENT: Page Index A B C D O P Q R S P P VQT1C39