Panasonic DMC-LZ6, DMC-LZ7 operating instructions Connecting to other equipment

Models: DMC-LZ6 DMC-LZ7

1 120
Download 120 pages 46.5 Kb
Page 87
Image 87

Connecting to other equipment

Do not use any other USB connection cables except the supplied one.

Do not disconnect the USB connection cable while [ACCESS] is displayed.

When there are many pictures on the built-in memory or a card, it may take some time to transfer them.

It may not be possible to playback the motion pictures on the built-in memory or a card normally when this unit and the PC are connected. Import the motion picture files to the PC and then play them back.

If battery power is exhausted while the camera and the PC are communicating, the recorded data may be damaged. Use batteries with sufficient battery power (P23) or the AC adaptor (DMW-AC6PP; optional) when you connect the camera to the PC.

If the remaining battery power becomes low while the camera and the PC are communicating, the status indicator blinks and the alarm beeps. In this case, stop the communication at once on the PC.

When connecting the camera to a “Windows 2000” OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Use “Safely Remove Hardware” in the task tray on your PC when replacing the card.

Pictures edited or rotated with a PC may be displayed in black in playback mode (P33), multi playback (P68) and calendar playback (P69).

Read the operating instruction for the PC.

If a card is not inserted when the camera is connected to the PC, you can edit or access the pictures on the built-in memory. If a card is inserted, you can edit or access the pictures on it.

You cannot switch between the built-in memory and the card while the camera is connected to the PC. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again.

The message [PLEASE RE-CONNECT THE PRINTER.] appears if you change

the mode dial to [ ] while the camera and the PC are connected. If a printer is

connected, change the mode to a mode

other than [ ] mode and then check that no data is being transferred. ([ACCESS]

appears on the LCD monitor of the camera while data is being transferred.)

87

VQT1C39

Page 87
Image 87
Panasonic DMC-LZ6, DMC-LZ7 operating instructions Connecting to other equipment