Advanced (Recording pictures)
Changing the sensitivity according to the movement of the subject being recorded
The camera detects the movement of the subject near the center of the screen and then sets the optimal ISO sensitivity and shutter speed according to the movement and the brightness of the subject.
1 Press [MENU/SET].
2 Press 3/4 to select [ISO LIMIT] and then press 1.
REC |
| 1/3 |
W.BALANCE | AWB | |
MAXISO ISO LIMIT | 400 | |
ASPECT RATIO | 800 | |
PICT.SIZE | 1250 | |
QUALITY | 1250 | |
| ||
SELECT | SET MENU |
|
3 Press 3/4 to select the item and then press [MENU/SET].
Item | Settings |
400The ISO sensitivity
800automatically increases
| up to the set value | |
1250 | according to the | |
movement and brightness | ||
| ||
| of the subject. |
•The higher the value set for the ISO sensitivity, the more effectively the jitter will be reduced. However, picture noise will increase.
44
•Jitter is avoided when taking pictures indoors of a moving subject by increasing the ISO sensitivity and making the shutter speed faster.
F2.8
1/125 ISO800
•Noise is avoided when taking pictures indoors of a subject with no movement by decreasing the ISO sensitivity.
F2.8
1/30 ISO200
•When you press the shutter button
halfway, [ 
] A appears. When you press the shutter button fully, the shutter
speed and the ISO sensitivity appear for a while.
F2.8
•The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 50 cm (1.64 feet) (Tele) to ¶]
•When the flash is activated, the ISO sensitivity is automatically increased to a maximum of [ISO640]. (When the highest ISO sensitivity is set to a setting other than [ISO400].)
•Refer to P40 for information about available flash range to take pictures.
VQT1C39
