- 125 -
GPS/Sensor
When the displayed location name information is different from the current location or when the
positioning is not successful, move to a location where the radio waves from GPS satellites can
be received better and perform the positioning update.
When significant time has elapsed since the last successful positioning ([ ], [ ], [ ] and [ ]
are displayed), we recommend performing a positioning update.

Select [Repositioning] on the [GPS/Sensor] menu, and then press [MENU/

SET].
Positioning is started and the current location information is updated once the positioning is
successful.
Checking the GPS reception status before updating
1Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/SET].
2Press 3/4 to select [INFO] and then press [MENU/SET].
Last updated positioning result is displayed.
3Press [MENU/SET] in the information confirmation screen.
Positioning is started and the current location information is updated once the positioning is
successful.
About automatic updating of positioning
Even if you do not perform [Repositioning], it will perform the posit ionin g aut omatically r ight a ft er thi s
unit is turned on, and in constant time intervals.
When [GPS Setting] is set to [ON], the unit will c ontinu e t o perf orm the p osi ti oning at a constant time
interval even if this unit is turned off. Note that if [Airplane Mode] has been set to [ON], positioning
will not be performed when this unit is turned off.
Positioning with this unit turned off is canceled in the following cases:
When the remaining battery power becomes [ ]
When this unit is not turned on for a specific period of time

Update the GPS information

[]Time positioning was performed
[]Number of GPS satellites received from
[]
Latitude
Longitude