- 122 -
GPS/Sensor
When [GPS Setting] is set to [ON], positioning is performed at regular intervals. When the
positioning is successful, location name information and latitude/longitude are acquired. For
details on the screen display for the acquired information, read “About the display of positioning
status and positioning results” on P123.
If GPS automatic time correction is set in the time settings at the time of purchase, [GPSSetting] will
be set to [ON] automatically.
1Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2Press 3/4 to select the settings and then press [MENU/SET].
When [GPS Setting] is set to [ON], the GPS function will operate ev en when thi s unit i s turned
off. Electromagnetic waves from this unit may affect other electronic devices, so set
[GPS Setting] to [OFF] or [Airplane Mode] to [ON] and turn the unit off when you carry this
unit onboard an airplane or inside a hospital, etc.

Acquiring of the GPS information

Settings Description of settings
[ON] Set the unit to receive the GPS satellite radio waves.
Positioning continues even when this unit is turned off.
[OFF]
[INFO] You can confirm and update the current reception status.
It is displayed when [ON] is set.
For detail, refer to Update the GPS information on P125.
Exit the menu after it is set.
•GPS status indicator i s li t du r i ng th e po sitioning. Also,
when the GPS status indicator is lit with this unit is turned
off, [GPS Setting] is set to [ON].
AGPS status indicator