- 14 -
Before Use
2Drain water by holding the camera upside
down and shaking it lightly a few times.
Make sure to put your hand through the strap to
prevent the camera from falling.
3Wipe off water drops on the camera with a
soft, dry cloth and dry the camera in a shaded
area that is well ventilated.
Dry the camera by standing it on a dry cloth. This
unit incorporates drain design, draining water in
gaps in the camera [ON/OFF] button and zoom
button, etc.
Do not dry the camera with hot air from dryer or
similar. Waterproof performance will deteriorate due to deformat ion.
Do not use chemicals such as benzine, thinner, alcohol or cleanser, soap or detergents.
4Confirm that there are no water droplet s , open the side door, and wipe off any water
droplets or sand left inside using a soft, dry cloth.
Water droplets may adhere to the card or battery when the side door is opened without
thoroughly drying. Also, water may accumulate in the gap around the card/battery slot or the
terminal connector. Be sure to wipe any water off with a soft, dry cloth.
The water droplets may seep into the camera when the side door is closed while it is still wet,
causing condensation or failure.