- 29 -
Preparation
6Press [MENU/SET].
Confirmation screen is displayed. Press [MENU/SET].
7Select [Yes] to automatically correct the clock, and then press [MENU/
SET].
Message screen is displayed. Press [MENU/SET].
8Press 2/1 to select the home area, and then
press [MENU/SET].
Confirmation screen to operate the altimeter, barometer
and compass is displayed. Select [Yes] to operate them.
Select [Clock Set] in the [Rec] or [Setup] menu, and press [MENU/SET]. (P48)
The clock can be reset as shown in steps 5 and 6.
The clock setting is maintained for 3 months using the built-in clock battery even without the
battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)
If the clock is not set, the correct date cannot be printed when you order a photo studio to print the
picture, or when you stamp the date on the pictures with [DateStamp] (P117) or [Text Stamp]
(P160).
If the clock is set, the correct date ca n be pr i n te d ev en if the date is not displayed on the screen of
the camera.
When [GPS Setting] is set to [ON], the GPS function wil l operat e even when this uni t is turne d
off. When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to
[ON], and turn off the camera because electromagnetic waves, etc. emitted by the camera
may interfere with gauges. (P53)
Changing the clock setting