- 61 -
Basic
Press [MENU/SET] on the version display screen to display information about the software on the
unit.
Use a battery with sufficient battery power or the AC adaptor (optional) when formatti ng. Do not tu rn
the camera off during formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
If the card has been formatted on a PC or other equipment, format it on the camera again.
It may take longer to format the built-in memory than the card.
If the built-in memory or the card cannot be formatted, consult Panasonic.
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
The Stabilizer function is switched betwe en [On] and [Off] every time [MENU/S ET] is pressed.
[Stabilizer Demo.] is an approximation.
[Version Disp.] It is possible to check which version of firmware is on the camera.
[Format] The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~ [Language] Set the language displayed on the screen.
[Stabilizer Demo.]
Displays the amount of jitter the camera has detected.
AAmount of jitter
BAmount of jitter after correction
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649)
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
AB