- 221 -
Connecting to other equipment
Installing supplied software
Before inserting the CD-ROM, close all running applications.
1Check the environment of your PC.
Operating environment of “PHOTOfunSTUDIO 9.1 PE”
OS:
WindowsR XP (32bit) SP3,
Windows VistaR (32bit) SP2,
WindowsR 7 (32bit/64bit) or SP1
WindowsR 8 (32bit/64bit)
CPU:
PentiumR III 500 MHz or higher (WindowsR XP),
PentiumR III 800 MHz or higher (Windows VistaR),
PentiumR III 1 GHz or higher (WindowsR 7/WindowsR 8)
Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
RAM:
512 MB or more (WindowsR XP/Windows VistaR),
1 GB or more (WindowsR 7 32bit/WindowsR 8 32bit),
2 GB or more (WindowsR 7 64bit/WindowsR 8 64bit)
Free hard disk space:
450 MB or more for installing software
Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating
environment.
2Insert the CD-ROM with the supplied software.
When you insert the supplied CD-ROM, the install menu will start.
3Click on the [Applications] on the install menu.
4Click on the [Recommended Installation].
Proceed with installation according to messages appearing on the screen.
The software compatible with your PC will be installed.
“PHOTOfunSTUDIO” and “LoiLoScope” are not compatible with Mac.