- 201 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P179) or [Favorite Connection] (P180).
3Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4Press 3/4 to select [PC], and then press [MENU/SET].
5Press 3/4 to select connection method, and then press [MENU/SET].
6Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
7Press 3/4 to select the destinations folder of the PC, and then press [MENU/SET].
•When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P192)
8Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•To change the setting or disconnect, press [Wi-Fi]. (P189)
9Select and send the images. (P200)
•Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
•If the screen for a user account and password entry appears, en ter the one you set on your PC.
When sending images to PC
Preparations:
•Turn the computer on.
•Prepare folders for receiving images on the PC before sending a picture to the PC. (P194)
•If the workgroup of the destination PC has been changed from the standard setting, you also need
to change the setting of this unit in [PC Connection]. (P211)
[Via Network] When you want to connect to your PC via a wireless access point.
(P185)
[Direct] When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P187)