- 256 -
Others
•This phenomenon appears when you press the shutter button halfway to set the aperture value and
does not affect the recorded pictures.
•This phenomenon also appears when the brightness changes when the camera is zoomed or when
the camera is moved. This is because of operation of the automatic aperture of th e camera, and i t is
not a malfunction.
•The LCD monitor may flicker for a few seconds after this unit is turned on. This is an operation to
correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
•Is [Monitor Luminance] active? (P54)
•Perform [Monitor Display]. (P53)
•This is not a malfunction.
These pixels do not affect the recorded pictures.
•In dark places, noise may appear to maintai n the br ight ness o f the LCD mon ito r. This does not affect
the pictures you are recording.
•Is the flash setting set to [Œ]?
>Change the flash setting. (P66)
•The flash cannot be used in the following cases:
–When using Auto Bracket (P72)
–Creative Control Mode (P75)
–Panorama Shot Mode (P84)
–[Scenery]/[NightScenery]/[Handheld Night Shot]/[HDR]/[Sunset]/[StarryS ky]/[Glass Through]/
[3D Photo Mode] (Scene Mode) (P87)
–When recording in [Burst] (except for [ ]) (P111)
•The flash is activated twice when Red-Eye Reduction (P66) has been set.
���Has [Burst] (P111 ) in the [Rec] menu been set to [ ]?
LCD monitorThe LCD monitor becomes darker or brighter for a moment.
The LCD monitor flickers indoors.
The LCD monitor is too bright or dark.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
FlashThe flash is not activated.
Flash is activated several times.