- 197 -
Wi-Fi
1Press [Wi-Fi].
2Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P179) or [Favorite Connection] (P180).
3Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4Press 3/4 to select [AV device], and then press [MENU/SET].
5Press 3/4 to select [Home] or [External], and then press [MENU/SET].
6Press 3/4 to select connection method, and then press [MENU/SET].
7Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P192)
8Take pictures.
To change the setting or disconnect, press [Wi-Fi]. (P189)
You cannot change the settings while sending picture s. Wait until sending is complete.
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
Registration to “LUMIX CLUB”. (P206)
Address number and access number acquired by the destination External AV device. (P210)
[Via Network] When you want to connect to an AV device via a wireless access point.
(P185)
[Direct]
This can be
selected only
when [Home]
is selected.
When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P187)