- 265 -
Others
Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P11.
>Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then
select the [~] icon to set the desired language. (P61)
AF Assist Lamp will turn on white in the dark place to assist the focusing.
Is [AFAssist Lamp] on the [Rec] menu set to [ON]? (P115)
The AF Assist Lamp does not turn on in bright places.
The surface of the camera may become warm during use. This does not affect the performance or
quality of the camera.
Have foreign objects become trapped?
>Remove the foreign objects. (P12)
When closing, do not set the [LOCK] switch to the locked side. Doing so may cause da mage or
leaks.
>Release the lock. (P22)
If the camera is used in cold places such as ski resorts or places at high altitude with the s now or
water droplets adhered to the camera, some parts of the camera may become hard to move with
snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF ] button. This
is not a malfunction. When the camera returns to normal temperature it will function as normal.
When using the camera in a place with sand or dust, some parts of the c amer a may bec ome har d to
move with foreign objects getting in the gap of the zoom button, or the camera [ON/OFF] button.
Wipe off with a dry, lint-free cloth or rinse with fresh water.
Below cases are not malfunctions, so you can use the camera as normal.
>You hear a “rattling” sound when the camera is shaken while this unit is turned off or during
Playback Mode (this is the sound of the lens moving).
>When this unit is turned on or off, or when switching from recording to Playback Mode, there is a
rattling noise (this is the sound of the lens moving).
>When zooming, you can feel some vibration (this is caused by the lens moving).
Others
[Requirements for Underwater use] is displayed repeatedly whenever this unit is
turned on.
An unreadable language was selected by mistake.
A white lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The side door will not close.
A part of the camera such as the zoom button and side door does not move.
The camera makes a rattling sound or you can feel some vibration.