- 132 -
GPS/Sensor

GPS Logs

Applicable modes:
Location information acquired in the GPS positioning is recorded continuously as a GPS log.
GPS logs are not recorded to the built-in memory. Please use the card.
1Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2Press 3/4 to select [Log Record], and then press [MENU/SET].
The message is displayed. Press [MENU/SET], and perform the operation of step 8 in
Setting Date/Time (Clock Set) (P28). (first time only)
3Set [Recording interval] and [Recording duration].
4Press 3/4 to select [Start] and then press [MENU/SET].
[ ] is displayed while recording.
End recording GPS log
1Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/SET ].
2Press 3/4 to select [Log Record], and then press [MENU/ SET].
3Press 3/4 to select [End], and then press [MENU/SET].
GPS log recording will end in the following case.
When the remaining battery power becomes [ ]
In the following cases, the file will be divided.
Changing the date
Changing the [WorldTime] area (time zone)
Record GPS Logs
[Recording
interval]
[60 SEC.], [30 SEC.], [15 SEC.]
Depending on the radiowave reception conditions, log recording intervals
may be longer.
[Recording
duration]
[ENDLESS], [48HRS], [24HRS], [12 HRS], [6HRS]
To continue recording a log without setting an end tim e , se t t o
[ENDLESS].