- 140 -
GPS/Sensor

You can specify the period of the recorded altimeter log to display.

1Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2Press 3/4 to select [Display Log], and then press [MENU/SET].
3Press 3/4 to select the recording start date, and press
[MENU/SET].
This unit can display up to only 1000 altimeter logs.
4Press 3/4/2/1 to select a date at which to start the

period to display, and press [MENU/SET].

It will not be displayed, if the date to start and the date to finish is the
same.

About the altitude graph

The altitude graph is displayed with the highest altitude in the log as the

upper limit and the lowest altitude as the lower limit.

Viewing the altimeter log

[W]/[T] Switches between the 12 hour display and the 48 hour display

2/1

Moves the log left and right

Move the log in units of 3 hours on the 12 hour display.
Move the log in units of 12 hours on the 48 hour display.
'(&'(&'(&'(&
SUNMONTUE
WED
THU
FRISAT
8
22
1
15
29
2
30
9
16
23
3
31
10
17
24
6
13
20
27
7
21
14
28
12
19
5
26
11
18
4
25
6000ft
0ft036912