- 94 -
Recording

Entering Text

It is possible to enter babies’ and pets’ names and the locations when
recording. When a screen that looks like the one on the right is displayed,
you can enter characters. (Only alphabetical characters and symbols can
be entered.)
1Press 3/4/2/1 to select text and then press [MENU/SET] to register.
Move the cursor to [ ] and then press [MENU/SET] to switch text between [A] (capit als ), [ a]
(lower case), [1] (numbers) and [&] (special characters).
To continuously enter the same character, move the cursor by pressing [T] on the zoom
button.
The following operations can be performed by moving the cursor to the item and pressing
[MENU/SET]:
The following characters and numbers can be entered.
2Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET]

to end text input.

Text can be scrolled if all of the entered text does not fit on the screen.
It is displayed in order of location name information, [Title], [Location], [Name] ([Baby1]/[Baby2],
[Pet]), [Name] ([Face Recog.]).
[]]: Enter a blank
[Delete]: Delete a character
[ ]: Move the entry position cursor to the left
[ ]: Move the entry position cursor to the right
A maximum of 30 characters can be entered (Maximum of 9 characters when setting
names in [Face Recog.]).
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ] (Maximum of
6 characters when setting names in [Face Recog.]).