Panasonic DMC LX 3, DMCLX3K Charging the Battery, Attach the battery with, Charging is completed

Preparation

Charging the Battery

•Use the dedicated charger and battery.

•The battery is not charged when the camera is shipped. Charge the battery before use.

•Charge the battery with the charger indoors.

•Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)

1	Attach the battery with
	attention to the direction of the

battery.

2	Connect the charger to the
	electrical outlet.

• Charging starts when the [CHARGE] indicator A lights green.

3	Detach the battery after
	charging is completed.

• Charging is complete when the [CHARGE] indicator A turns off (after approx. 130 min maximum).

∫When the [CHARGE] indicator flashes

•The battery temperature is excessively high or low. The charging time will be longer than normal. Also, charging may not be completed.

•The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

Note

•After charging is completed, be sure to disconnect the power supply device from the electrical outlet.

•The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction.

•The battery will be exhausted if left for a long period of time after being charged.

•The battery can be recharged even when it still has some charge left, but it is not recommended that the battery charge be frequently topped up while the battery is fully charged. (The battery has characteristics that will reduce its operating duration and cause the battery to swell up.)

•When the operating time of the camera becomes extremely short even after properly charging the battery, the life of the battery may have expired. Buy a new battery.

VQT1T27 15