Advanced (Playback)

You cannot select [CANCEL] if not even one picture has been set for DPOF printing.

To print the date

After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY].

When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required.

Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer.

The date cannot be printed on pictures stamped with text.

If you set [TEXT STAMP] for pictures that have been set for date printing, the date printing setting is canceled.

Note

The number of prints can be set from 0 to 999.

With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case.

It may not be possible to use the DPOF print settings with other equipment. In this case, cancel all the settings, and reset the settings.

If the file is not based on the DCF standard, the DPOF print setting cannot be set.

P[PROTECT]

You can set protection for pictures you do not want to be deleted by mistake.

1

2

Select [PROTECT] on the [PLAYBACK] mode menu. (P21)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

 

[SINGLE]

[MULTI]

3

Select the picture, and then

 

 

press [MENU/SET].

 

 

 

When [MULTI] has been selected

Repeat these steps for each picture.

The settings are canceled when [MENU/ SET] is pressed again.

Press 2/1 to select Press 3/4/2/1 to

the picture.

select the pictures.

4 Press [] to return to the menu screen.

Press [MENU/SET] to close the menu.

Canceling all the [PROTECT] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press 3 to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

VQT1T27 107

Page 107
Image 107
Panasonic DMC LX 3 Protect, Select the picture, and then Press MENU/SET, To print the date, When Multi has been selected