Panasonic DMCLX3K Built-in memory or card is formatted, Set the language displayed on the screen

Preparation

[m/ft]

Change the unit displayed for the focus distance in manual focus, or recordable range display.

[m]: The distance is displayed in meters.

[ft]: The distance is displayed in feet.

}[SCENE MENU]

Set the screen that will appear when a scene mode has been selected.

[OFF]: The recording screen in the currently selected scene mode appears.

[AUTO]: The [SCENE MODE] menu screen appears.

[VERSION DISP.]

It is possible to check which version of firmware is on the camera.

[FORMAT]

The built-in memory or card is formatted.

Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

	Set the language displayed on the screen.
~ [LANGUAGE]	[ENGLISH]/[DEUTSCH]/[FRANÇAIS]/[ESPAÑOL]/[ITALIANO]/
	[繁體中文]¢/[¢]
	¢Not available on the version DMC-LX3P sold in the U.S.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

28 VQT1T27