Panasonic DMC LX 3, DMCLX3K Inserting and Removing the Card optional/the Battery

Preparation

The charging time will vary slightly depending on the status of the battery and the conditions in the charging environment.

When the charging has been completed successfully, the [CHARGE] indicator turns off.

Note

•The battery may swell and its operating time may become shorter as the number of times it is charged increases. For long term battery use, we recommend you do not frequently charge the battery before it is exhausted.

•The performance of the battery may temporarily deteriorate and the operating time may become shorter in low temperature conditions (e.g. skiing/snowboarding).

Inserting and Removing the Card (optional)/the Battery

•Check that this unit is turned off.

•Close the flash.

•We recommend using a Panasonic card.

1	Slide the release lever in the direction of
	the arrow and open the card/battery door.

• Always use genuine Panasonic batteries (CGA-S005A).

• If you use other batteries, we cannot guarantee the quality of this product.

2	Battery: Insert it fully being careful about
	the direction you insert it. Pull the lever

A in the direction of the arrow to remove the battery.

Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

B: Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

VQT1T27 17