NOTE: Your Tablet-PC’s Service Tag and Microsoft®Windows® License labels are located under the main battery in the battery bay of your Tablet-PC

Removing the Main Battery

1Follow the procedures in "Before You Begin" on page 155.

2Turn off your Tablet-PC (see "Turning Off Your Tablet-PC" on page 155).

3If the Tablet-PC is connected to a docking device such as the optional Media Base or Battery Slice (docked), undock it. See "Undocking Your Tablet-PC From the Media Base" on page 212, or "Undocking Your Tablet-PC From the Battery Slice" on page 220.

NOTICE: To disconnect a network cable, first unplug the cable from your Tablet-PC and then unplug the cable from the network device.

4Disconnect all network cables from the Tablet-PC.

NOTICE: To avoid damaging the system board, you must remove the main battery before you service the Tablet-PC.

5Close the display and turn the Tablet-PC upside-down on a flat work surface.

6Slide the two battery-bay latch releases on the bottom of the Tablet-PC outward to each side.

7Slide the main battery from the battery bay.

158

Adding and Replacing Parts

Page 158
Image 158
Dell PP12S manual Removing the Main Battery, 158