1

Tablet-PC release lever

2

AC adapter connector

3

audio connector

4

IEEE 1394

5

VGA video connector

6

digital video interface (DVI) connector

7

serial connector

8

USB connector

9

powered USB connector

10

network connector

TA B L E T - PC R E L E A S E L E V E R Lets you undock the Tablet-PC from the media base (see "Undocking Your Tablet-PC From the Media Base" on page 212).

AC A D A P T E R C O N N E C T O R

Connects an AC adapter to the media base and to AC power to convert AC power to the DC power required by the media base. You can connect the AC adapter with your media base either turned on or off. For more information, see "Setting Up Your Media Base" on page 209.

CAUTION: If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the power strip. Some power strips may allow you to insert the connector incorrectly. Incorrect insertion of the power connector could result in permanent damage to your media base as well as electric shock and/or fire. Ensure that you insert the ground prong of the power plug into the mating ground contact of the power strip.

NOTICE: When you disconnect the AC adapter from the media base, hold the adapter cable connector, not the cable itself, and pull firmly to avoid damaging the cable.

Media Base (Optional)

205

Page 205
Image 205
Dell PP12S manual 205