2Connect the coin-cell battery connector to the connector on the system board.

3Install the keyboard (see "Installing the Keyboard" on page 177).

4Install the hinge cover (see "Installing the Hinge Cover" on page 175).

Display Assembly

CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC.

Removing the Display Assembly

1Follow the procedures in "Before You Begin" on page 155.

2Remove the hinge cover (see "Removing the Hinge Cover" on page 174).

3Remove the keyboard (see "Removing the Keyboard" on page 176).

4Remove any installed Mini-Cards (see "Removing a Mini-Card" on page 171).

5Use the pull-tab to disconnect the display cable from the system board.

Adding and Replacing Parts

179

Page 179
Image 179
Dell PP12S manual Removing the Display Assembly, 179