1

1 M2.5 x 5-mm screws (2)

10Lift the display assembly from the base, and place the display assembly to one side.

Installing the Display Assembly

1Place the display assembly on the base.

2Feed the Mini-Card antenna cables from the top through the antenna channel to the bottom of the system.

Align the shrink tube that is wrapped around the antenna cables to the edge of the palm rest. Make sure the antenna cables are flat (contained within the recessed area) and do not overlap. Secure the antenna cables with the tape that was removed from the cables when removing the display assembly.

NOTE: If the cables do not lie flat in the recessed area or if they overlap the palm rest, then the keyboard will not sit flat on the palm rest.

182

Adding and Replacing Parts

Page 182
Image 182
Dell PP12S manual Installing the Display Assembly, 182