Panasonic DMC LX 3, DMCLX3K Supplied, Press 3/4 to select PictBridgePTP, and then

Connecting to other equipment

1	Connect the camera to a printer via the USB connection cable A
	(supplied).
		COMPONENT	OUT
		AV OUT/	DIGITAL
		DC IN

AUSB connection cable (supplied)

•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.)

BAlign the marks, and insert.

CAC adaptor (DMW-AC5PP; optional)

•Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.

•When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears. Do not disconnect the USB cable while [å] is displayed.

2	Press 3/4 to select [PictBridge(PTP)], and then
	press [MENU/SET].

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT SET MENU

Note

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneously by the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed.

VQT1T27 113