Panasonic DMC LX 3, DMCLX3K Flash Burst, Starry SKY, Setting the shutter speed

Advanced (Recording pictures)

•The burst speed changes according to the recording conditions.

•The number of burst recording pictures are limited by the picture-taking conditions and the type and/or status of the card used.

•The number of burst recording pictures increase immediately after formatting.

Note

•[QUALITY] is automatically fixed to [›].

•You can take pictures suitable for 4qk6q/10k15 cm printing.

•The shutter speed becomes 1/8th of a second to 1/2000th of a second.

•The focus range becomes the same as AF macro mode. [1 cm (0.04 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶]

•The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the settings for the first picture.

•The ISO sensitivity automatically switches to between [ISO500] and [ISO800]. However, the ISO sensitivity is increased to make the shutter speed become high-speed.

[FLASH BURST]

Still pictures are taken continuously with flash. It is convenient to take continuous still pictures in dark places.

•Still pictures are taken continuously while the shutter button is pressed fully.

Number of recordable pictures

max. 5 pictures (while pressing the shutter)

•The burst speed changes according to the recording conditions.

•3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture size.

Note

•[QUALITY] is automatically fixed to [›].

•You can take pictures suitable for 4qk6q/10k15 cm printing.

•The focus range becomes the same as AF macro mode. [1 cm (0.04 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶]

•The focus, zoom, exposure, shutter speed, ISO sensitivity, and flash level are fixed to the settings for the first picture.

•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO3200].

•See the Note on P49 when using the flash.

5[STARRY SKY]

This allows you to take vivid pictures of a starry sky or a dark subject.

∫Setting the shutter speed

Select a shutter speed of [15 SEC.], [30 SEC.] or [60 SEC.].

1Press 3/4 to select the number of seconds and then press [MENU/SET].

•It is also possible to change the number of seconds using the quick menu. (P23)

VQT1T27 67