Panasonic DMC LX 3, DMCLX3K operating instructions ISO Limit SET, = White Balance

Advanced (Recording pictures)

•ISO sensitivity will adjust automatically depending on brightness within the maximum setting of [ISO400] ([ISO1000] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].

•The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)

•It is recommended to set the ISO sensitivity lower, adjust the [NOISE REDUCTION] under [FILM MODE] toward the positive side, or adjust the setting for each of the items other than [NOISE REDUCTION] toward the negative side if the noise is predominant. (P74)

[ISO LIMIT SET]

For details on [REC] mode menu settings, refer to P21.

Most appropriate sensitivity within the range set will be set depending on the brightness of the subject.

Applicable modes: [AUTO]/[200]/[400]/[800]/[1600]/[3200]

Note

•The upper limit of the ISO sensitivity can be set.

•The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise.

•It will work when the [SENSITIVITY] is set to [AUTO] or [INTELLIGENT ISO] is set to [ON].

=[WHITE BALANCE]

For details on [REC] mode menu settings, refer to P21.

In sunlight, under incandescent lights or in other such conditions where the color of white takes on a reddish or bluish tinge, this item adjusts to the color of white which is closest to what is seen by the eye in accordance with the light source.

Applicable modes:

[AWB]:			Automatic adjustment
[V]:			When taking pictures outdoors under a clear sky
[Ð]:			When taking pictures outdoors under a cloudy sky
[î]:			When taking pictures outdoors in the shade
[		]¢:	When taking pictures with the flash only
[Ñ]:			When taking pictures under incandescent lights
[		]:
	1
			When using the preset white balance
[		]:
	2
[		]:	When using the preset color temperature setting

¢It cannot be selected in the motion picture mode.

VQT1T27 79