Panasonic DMC LX 3 Using the External Flash optional, Attach the dedicated flash to the hot

Connecting to other equipment

•Ensure that the screw parts of the lens adaptor and the filter are properly tightened.

Note

•Do not attach multiple filters at the same time.

•If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much.

•If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera.

•Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus may be adjusted to the lens, resulting in the subject being out of focus.

•Refer to the instructions for each filter for details.

•Turn off the camera when removing the filter.

•MCu“Multi-coated”

NDu“Neutral Density”

Using the External Flash (optional)

After attaching the external flash, the effective range will be increased when compared to the camera’s built in flash.

Preparations: Turn off the camera and close the built-in flash.

∫Using the dedicated flash (DMW-FL360; optional)

1	Attach the dedicated flash to the hot
	shoe A and then turn on the camera and

the dedicated flash.

• Be sure to firmly secure to dedicated flash with the lock ring B.

2 Press 1[‰].

VQT1T27 121