Panasonic DMCLX3K Using the Protector/Filter, Select Conversion on the REC menu, Attach a filter

Connecting to other equipment

4

5

Select [CONVERSION] on the [REC] menu.

•Refer to P90 for [CONVERSION].

Press 3/4 to select [], and then press [MENU/SET] to set.

Note

•When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures.

•When the wide conversion lens is removed, set [CONVERSION] to [OFF].

•When you take pictures at close range, the resolution of the periphery of the picture may decrease slightly. This is not a malfunction.

•Refer to operating instructions of the wide conversion lens for details.

•Turn off the camera when removing the conversion lens.

•When the [CONVERSION] (P90) is set to [], the flash is fixed to [Œ].

Using the Protector/Filter

The MC protector (DMW-LMC46; optional) is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera’s lens. The ND filter (DMW-LND46; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the color balance. PL filter (DMW-LPL46; optional) will suppress the reflected light from a metal or non spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it possible to take a picture with enhanced contrast.

Preparations: Turn off the camera and remove the lens cap.

1 Remove the lens ring front.

• Be careful not to lose the lens ring front.

2

3

Attach the lens adaptor.

•Rotate the lens slowly and carefully. A Lens adaptor (DMW-LA4; optional)

Attach a filter.

BMC protector C ND filter

D PL filter

120 VQT1T27