Panasonic DMCLX3K, DMC LX 3 Registering Personal Menu Settings Registering, Prefocus

Advanced (Recording pictures)

∫Prefocus

This allows the camera to be focused in advance on an arbitrary point. It is useful when it is difficult to achieve a sharp focus using autofocus or the subject is fast-moving.

This function is suitable when the distance between the camera and the subject is certain.

Note

•You can also use manual focus while in motion picture mode, but the focus cannot be adjusted during recording.

•If you focus on the subject in Wide and then rotate the zoom lever to Tele, the focus may not be adequate. In this case, focus on the subject again.

•The MF assistance does not appear when using the digital zoom.

•The distance to the subject displayed on the screen in manual focus is an approximation of the focus position. Use the MF assistance screen for a final check of the focus.

•After canceling power save mode, focus on the subject again.

[REC] mode:

Registering Personal Menu Settings (Registering

custom settings)

It is possible to register up to 4 sets of current camera settings as custom sets.

•Set to the mode dial to the desired mode and select the desired menu settings in advance.

1

2

Select [CUST. SET MEM.] on the [SETUP] menu.

Press 3/4 to select the custom set to register and then press [MENU/SET].

• The custom settings registered in [	] can be
used with the [ ] of the mode dial. It will be
convenient if the custom setting used often is		MENU
registered, since it can be used by just setting the
		/SET

mode dial.

•The custom settings registered in [ ], [ ],

or [ ] can be selected in the [ ] of the mode dial. Up to 3 custom settings can be registered, so select the one matching the needs.

3	Press 3 to select [YES] and then press
	[MENU/SET].

•When [YES] is selected, the settings that were previously stored are overwritten.

•You cannot save the following menu items because they affect other recording modes.

–[CLOCK SET]

–[TRAVEL DATE]

–[SCENE MENU]

–[RESET]

–[NO.RESET]

–[BABY1]/[BABY2] or [PET] birthday and name settings in scene mode

4 Press [MENU/SET] to close the menu.

MENU /SET

60 VQT1T27