Panasonic DMC LX 3 Operations performed during slide show, Changing the slide show settings

Advanced (Playback)

6	Press 3 to select [START] and then press [MENU/
	SET].
7
	Press 4 to finish the slide show.

•Normal playback resumes after the slide show finishes.

∫Operations performed during slide show

The cursor displayed during playback is the same as 3/4/2/1.

•The menu screen is restored when [‚] is pressed.

APlay/Pause B Stop

C Back to previous picture¢ D Ahead to next picture¢

¢ These operations can be performed only in the pause mode.

EReduce volume level

F Increase volume level

∫Changing the slide show settings

You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] on the slide show menu screen.

[EFFECT]

This allows you to select the screen effects or music effects when switching from one picture to the next.

[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]

•When [URBAN] has been selected, the picture may appear in black and white as a screen effect.

•[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures are played back with the recommended effects in each category.

[SETUP]

[DURATION] or [REPEAT] can be set.

Item	Settings
[DURATION]	1SEC./2SEC./3SEC./5SEC.
[REPEAT]	ON/OFF
[MUSIC]/[AUDIO]	ON/OFF

•[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.

•[AUDIO] will be displayed only when the [EFFECT] is set to [OFF]. Audio will be played along with the still picture with audio by setting the [AUDIO] to [ON].

Note

•Motion pictures cannot be played back as a slide show.

•It is not possible to add new music effects.

VQT1T27 93