Panasonic DMC LX 3, DMCLX3K This Picture is Protected, No Additional Selections can be Made

Others

[THIS PICTURE IS PROTECTED]

>Delete the picture after canceling the protect setting. (P107)

[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]

•Pictures not based on the DCF standard cannot be deleted.

>If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P28)

[NO ADDITIONAL SELECTIONS CAN BE MADE]

•The number of pictures, which can be set at one time when [MULTI] has been selected for [DELETE MULTI] (P43), [FAVORITE] (P105), [TITLE EDIT] (P98), [TEXT STAMP] (P99) or [RESIZE] (P101) has been exceeded.

>Reduce the number of pictures set, and then repeat the operation.

•More than 999 favorites have been set.

[CANNOT BE SET ON THIS PICTURE]

•[TITLE EDIT], [TEXT STAMP] or [DPOF PRINT] cannot be set for pictures not based on the DCF standard.

[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THE CARD]

•There is no space left on the built-in memory or the card.

–When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]

•The following pictures cannot be copied.

–When a picture with the same name as the picture to be copied exists in the copy destination. (Only when copying from a card to the built-in memory.)

–Files not based on the DCF standard.

•Moreover, pictures recorded or edited by other equipment may not be copied.

[BUILT-IN MEMORY ERROR FORMAT BUILT-IN MEMORY?]

•This message will be displayed when you formatted the built-in memory on a PC.

>Format the built-in memory on the camera again. (P28) The data on the built-in memory will be deleted.

[MEMORY CARD ERROR FORMAT THIS CARD?]

•This card has a format which is not recognized by the camera.

>Format the card again with the camera after saving necessary data on a PC etc. (P28)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]

•This message appears when the camera is not operating properly.

>Turn the camera off and on. If the message persists, contact the dealer or your nearest Service center.

[MEMORY CARD PARAMETER ERROR]

>Use a card compatible with this unit. (P18)

•You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

VQT1T27 129