Options and Supplies

Expansion Flash Memory Card

Installing the Expansion Flash Memory Card (1 MB: UE-410045, 2 MB: UE-410046, 4 MB: UE-410047)

Before installing, make sure that there is no document file(s) stored in memory. To confirm, observe the standby display while the machine is in the FAX Mode and ensure that "00%" percentage is shown.

When the memory card is installed, the machine initializes the document memory, and erases all contents stored in the document memory.

2

1

Memory

Card Cover

1Turn the Power Switch OFF.

2Remove the Memory Card Cover.

Gently insert the Memory Card into the card slot.

Important: The Panasonic logo on the Memory Card must be facing toward the front of the copier.

!CAUTION

Do not install or remove the memory card while the power switch is ON.

3

Card Slot (Copier left rear side)

4

4Re-install the Memory Card Cover.

5Turn the Power Switch ON.

6Print the Fax Parameter List (See page 87) and confirm that the memory size on Fax Parameter No. 99. (See page 37 and the Note 1 below)

5

Memory

Card Cover

NOTE

1. Document(s) stored in memory will be lost if the Memory Card is removed.

103

APPENDIX

 

Page 103
Image 103
Panasonic DP-135FP appendix 103, Expansion Flash Memory Card