Panasonic DP-135FP appendix Adding Paper, Adding Toner, Removing Paper Jams, Troubleshooting

Troubleshooting

Mode	Symptom		Cause / Action	page
	Vertical lines printing	Print a Journal report (e.g. FUNCTION, 6, 1 , SET and 1) and		79
	on the received	check the quality to make sure whether your machine has
	document	trouble.
		If the Journal report quality is OK, your machine has no		94
		problem, report to the sending party that they have a problem.
		If copy is NG, replace the Toner Cartridge.
	Fuzzy print	1.	Make sure you are using the correct paper for the best	--
Print Copy Quality			possible print quality.
		2.	Try reversing the recording paper to the other side.
	Missing dots or lines/	1.	Make sure you are using the correct paper for the best	--
	inconsistent darkness		possible print quality.
	within print	2.	Replace the Toner Cartridge.	94
	Fading print	Your Toner Cartridge may be running out of toner. Replace		94
		the Toner Cartridge.
	Faint print	You may need to choose a different paper for the best possible		--
		print quality.
	No dial tone	1.	Check the connection of the telephone line.	97
		2.	Check the telephone line.
	No auto answer	1.	Check the connection of the telephone line.	97
		2.	Check the Reception mode setting.	58
		3.	If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
Communication			set to "Valid" (default setting) and the machine is printing
			the received document from memory, which also happens
			to be the 40th transaction, the machine will not auto answer
			until the Transaction Journal completes printing.
	Cannot transmit or	An information code will be shown on the display. Refer to the		89
	receive	information code table to find out the trouble.
No Unit Operation	No unit operation	To reset the machine, turn-off the Power Switch for a few		--
		seconds then turn it on again.

Adding Paper

See Operating Instructions (For Copier) P.21

Adding Toner

See Operating Instructions (For Copier) P.23

Removing Paper Jams

See Operating Instructions (For Copier) P.25 ~ 28

92