Panasonic DP-135FP appendix On-Hook Dialing, Sending Documents, Redial/Pause, Tone

Sending Documents

On-Hook Dialing

For On-Hook Dialing, follow the steps below.

	1	2	3
	4	5	6
	7	8	9
-	+	0

START

FAX MONITOR

Make sure that the FAX Mode indicator is ON. If not, press FAX

1

Set the original(s) face up on the ADF.

2 MONITOR

You will hear dial tone through the monitor speaker.

3 Dial the telephone number from the keypad or use Directory Search Dialing.

Ex: 5 5 5 1 2 3 4

to select the "FAX MODE".

ENTER STATION(S)

THEN PRESS START 00%

* MONITOR *

❚

* DIALING * 5551234❚

BASIC OPERATIONS

4	When you hear a beep,	ON LINE * XMT *
	START

NOTE

1.	If you need a special access number to get an outside line, dial it first then press	REDIAL/PAUSE	to enter a
	pause (represented by a "-") before dialing the full number.
	Ex: 9 PAUSE 5551234
2.	If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
			TONE
	(represented by a "/").

The dialing mode will be changed from Pulse to Tone after dialing the digit "/".

Ex: 9 PAUSE TONE 5551234

3.On-Hook Dialing is only available from the ADF. If you need to send pages from a Book or originals that can not be fed through the ADF, make a copy on the Platen Glass first then use the ADF for Voice Mode Transmission.

55