56
VQT1N58
Portrait mode
≥If this mode is used indoors, the screen may
flicker. If so, change the scene mode setting to
[OFF].
Spotlight mode
≥If the recording subject is extremely bright, the
subject may become washed out and the
periphery extremely darkened.
Surf & snow mode
≥If the subject is extremely bright, the recorded
image may become washed out.
If auto focusing is difficult due to the conditions, then use manual focus.
≥Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l55)
1(When MF assist function is used)
Select the menu. (l21)
≥This function’s default setting is [ON].
2Move the switch down and set it
to FOCUS position.
The manual focus indication [MF] and the icon
shown in the illustration appear.
3Move the cursor button to bring
the subject into focus.
The centre of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥The centre of the screen is not enlarged when
[MFASSIST] is [OFF].
≥Move the AUTO/MANUAL/FOCUS switch
down again to the FOCUS or AUTO position to
restore to the automatic adjustment.
≥MF assist does not work if the zoom
magnification is more than 10k.
≥The part of the screen that is enlarged is not
enlarged on the image actually recorded.
≥The zebra pattern does not appear on the part
of the screen that is enlarged when [ZEBRA] is
[ON].
Manual focus adjustment
[ADVANCED] # [MFASS IST] # [ON]
AUTO
MANUAL
FOCUS
HDCSD9EP-VQT1N58_eng.book 56 ページ 2008年1月10日 木曜日 午後9時36分