108
VQT1N58
If faulty management information is found when a SD card is accessed, one of the following messages
may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)
Use a sufficiently charged battery or the AC adaptor.
Depending on the condition of the data, it may not be possible to completely repair the data.
If the recovery fails, you will no longer be able to play back the scenes recorded before the power
went off.
When data recorded on another device is recovered, it may not be possible to play back the data on
this unit or the other device.
If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery fails
repeatedly, format an SD card on the unit. Please be aware that if an SD card is formatted, then all
the data recorded on the card will be erased. Back up important data on a PC, DVD disc etc.
If the thumbnail information is recovered, displaying the thumbnails may become slower.
CANNOT COPY TO DISC WITH RECORDED IMAGES. INSERT DISC WITH NO RECORDED
IMAGES.
Data cannot be copied since a disc that cannot be used by connecting the unit and the DVD burner
or a used disc is inserted. Please use a new disc. (l82)
DISCONNECT USB CABLE.
The unit cannot correctly establish the connection to the PC or printer. Disconnect and then
reconnect the USB cable.
DISCONNECT USB CABLE.
You cannot turn off this unit while it is connected to a PC or a DVD burner.
About recovery
CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)
or
THUMBNAIL DATA ERROR IS DETECTED.
HDCSD9EP-VQT1N58_eng.book 108 ページ 2008年1月10日 木曜日 午後9時36分