CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1.Use only the battery(ies) instructed.

2.Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.

3.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4.Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

5.Do not attempt to recharge the battery(ies) provided with or identified for use with this product. The batteries may leak corrosive electrolyte or explode.

6.Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin.

7.When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies). (Applies to products employing more than one separately replaceable primary battery.)

8.When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, and that may result in leakage or explosion. (Applies to product employing more than one separately replaceable primary battery.)

9.Remove the batteries from this product if the product will not be used for a long period of time (several months or more) since during this time the battery could leak in the product.

10.Discard “dead” batteries as soon as possible since “dead” batteries are more likely to leak in a product.

11.Do not store this product, or the batteries

10. General Information

provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage.

INSTALLATION:

1.Never install telephone wiring during a lightning storm.

2.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

4.Use caution when installing or modifying telephone lines.

WARNING:

To prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.

OTHER INFORMATION

ÁKeep the unit away from electrical noise- generating devices, such as fluorescent lamps and motors.

ÁThe unit should be kept free from dust, moisture, high temperature, and vibration.

ÁThe unit should not be exposed to direct sunlight. ÁDo not place heavy objects on top of this unit. ÁDo not damage the power cord.

ÁDo not touch the plug with wet hands.

ÁDo not use benzine, thinner, or any abrasive powder, to clean the cabinet. Wipe it with a soft cloth.

ÁDo not mix different types of batteries. ÁDo not use Nickel-Cadmium batteries.

10

81

Page 80 Page 82
Page 81
Image 81
Panasonic KX-F1100AL, KX-F1000AL manual Installation
Page 80 Page 82

KX-F1000AL, KX-F1100AL specifications

The Panasonic KX-F1100AL and KX-F1000AL are compact, efficient fax machines that cater to both home and small office needs. These models exemplify Panasonic's commitment to quality and user-friendly design, making them ideal choices for users seeking reliable document transmission.

One of the main features of the KX-F1100AL is its high-speed faxing capability. This model can send a page in as little as 15 seconds, ensuring that important documents are delivered swiftly. It also supports a variety of transmission modes, including full-duplex communication, which allows for simultaneous sending and receiving of faxes, further enhancing productivity.

The KX-F1000AL shares many similarities but is optimized for essential faxing functions without sacrificing performance. Both models utilize Thermal Transfer printing technology, which produces sharp, clear text and graphics. This method is cost-effective, as it relies on user-replaceable ink ribbons instead of traditional toner cartridges. This reduces overall maintenance costs while ensuring high-quality output.

An integral characteristic of these fax machines is their user-friendly operation. They come equipped with a straightforward numeric keypad and a large LCD display that simplifies navigation through settings and features. Additionally, both models feature a built-in telephone receiver, allowing users to easily switch between faxing and voice calls.

Both KX-F1100AL and KX-F1000AL also support a range of additional features, including automatic redial, and a memory capacity for up to 25 pages, ensuring that your important documents are not lost even in the event of a paper jam or power failure. Their compact design makes them easy to fit into any workspace, while their robust build ensures durability over time.

In terms of connectivity, these models are designed for standard telephone lines, making them compatible with most home and office setups. Their energy-efficient design helps reduce power consumption, aligning with modern eco-friendly practices.

In summary, the Panasonic KX-F1100AL and KX-F1000AL are reliable, efficient fax machines that deliver fast performance, clear output, and user-friendly features. They are perfect solutions for users in need of a dependable faxing option that emphasizes ease of use while maintaining high-quality standards. With their combination of technology and practicality, these machines effectively fulfill the demands of today's fast-paced business environments.
Top Page Image Contents