Loading paper
There are two paper feed procedures: automatic sheet feed and manual feed.
Using automatic sheet feed
Use this procedure for ink jet paper, ink jet transparencies and other media other than thick paper or resume paper. You can stack about 100 sheets of plain paper (20 lb or 95 g/m2) in the paper tray.
1 Pull the paper rest up until it stops. | Paper rest |
¡Unless the paper rest is pulled up, a paper jam or |
|
multiple sheet feeding may occur. |
|
2 Set the paper selection lever to the correct position.
¡For ink jet paper, color ink jet paper, plain paper, ink jet transparencies, or ink jet back print films, set to the back position.
¡For ink jet glossy paper, set to the front position.
3 Fan the paper and slide it into the paper tray.
¡Align the edge of the paper with the right edge of the paper tray.
¡The height of the paper should not exceed the limit mark on the paper tray.
¡If you have difficulty in sliding the paper, tilt the document tray towards you then slide the paper into the paper tray.
4 Adjust the paper guide.
Paper selection lever
Document tray
Limit mark
UPPER LIMIT
Paper tray
Paper guide
10