Note:
¡Do not insert paper of different thickness in the paper tray at same time. This may cause a paper jam. ¡Avoid extremely smooth or shiny paper that is highly textured. Also avoid coated, damaged, or wrinkled
paper and paper with a cotton and/or fiber content that is over 20%. ¡Avoid used paper for
¡Do not use paper printed with this unit for
¡Do not touch the printing area with your fingers. When you touch the film, the ink will smear.
¡When automatically feeding transparencies, remove each sheet after it is output. Otherwise the sheets may stick together.
Using manual feed
Use this procedure for thick paper (24 lb to 28 lb or 91 g/m2 to 105 g/m2) or resume paper.
1 Pull the paper rest up until it stops. | Paper rest |
2 Set the paper selection lever to the front position.
Paper selection lever
3 | Insert a single sheet of paper into the paper tray. | Paper guide |
| ||
|
|
¡Align the sheet with the right edge of the paper tray.
¡Adjust the paper guide.
Note:
¡If you print from a Windows application, you must select Manual Feed in the printer driver.
11