5 Store or dispose of the print cartridge.

¡If you are switching cartridges, store the cartridge you are removing in the cartridge container.

6

Unwrap the new print cartridge and remove the

print head cap and the protective tape.

 

Caution:

 

¡Do not use the removed print head cap and

 

protective tape again, or the recorded image may

 

be distorted.

7

Slide the print cartridge straight into the cartridge

holder (A) and press the green lock lever down

 

completely (B).

 

¡Be careful not to touch the rollers with the print

 

head.

 

¡Make sure the cartridge is pressed against the back

 

of the holder.

8

Make sure the marks on the lever and the cartridge

holder align and set the paper thickness lever.

 

¡If you installed a KX-FA150 print cartridge, set the

 

lever to the left.

 

If you installed a KX-FA151 color print cartridge, set

 

the lever to the center.

 

Caution:

 

¡Do not move the mechanism that houses the

 

print cartridge. Attempting to move the print

 

cartridge holder will damage the unit.

9

Close the lid securely by pushing down on both

sides.

Print head cap

Protective tape

Green lock lever

A B

Print cartridge holder

Marks

Paper thickness lever

Note:

¡Whenever the unit is idle, the print cartridge holder is in the home position on the right and caps the print cartridge. If you unplug the unit while it is printing, or if you move the cartridge from the home position, the cartridge will not be capped and may dry out.

56