Loading Envelope DL envelopes

When you use Envelope DL or envelopes that are shorter than 83⁄4 inch (222 mm) in width, you can load up to 15 envelopes at a time and use the automatic sheet feeding.

up Setting for

1

2

Set the paper thickness lever to the right.

Pull up the paper rest and set the paper selection lever to the front.

Paper thickness lever

Right

Paper rest

Paper selection lever

Unit the Printing

3

Insert the envelopes (up to 15 envelopes) printing

side up.

¡Align the edge of the envelopes with the right edge of the paper tray.

¡Adjust the paper guide.

¡The height of the envelopes should not exceed the limit mark.

Paper guide

Limit mark

UPPER LIMIT

Using the envelope mode

If you are not using Windows and your software application does not have an envelope feature, you can turn on the unit’s envelope mode using the ENVELOPE button.

1.Make sure the unit is on-line.

2.Open the station key panel and press (ENVELOPE). The display will show:

ENVELOPE MODE

3.Press (ON\LINE) to set the unit on-line.

To turn the envelope mode off:

1.Open the station key panel and press (ENVELOPE) when the unit is on-line.

2.Press (ON\LINE) to set the unit back on-line.

(ON\LINE)

(ENVELOPE)

13