Setting the paper thickness lever

Use the paper thickness lever to adjust the distance between the print head and the paper to accommodate different paper thicknesses.

up Setting Printing for

1

2

Slide the front lid open lever towards you to open the front lid.

Set the paper thickness lever to the correct position.

¡For printing on ink jet paper or plain paper using a black print cartridge, set to the left position.

¡For printing on any type of paper using the color print cartridge, or printing on color ink jet paper, ink jet glossy paper, ink jet transparencies, or ink jet back print film, set to the center position.

¡For printing on thick paper or envelopes, set to the right position.

Paper thickness lever

Right

Center

Left

Front lid open lever

Unit the

Setting the paper selection lever

You must set the paper selection lever according to the paper you use.

Be sure to remove any paper from the paper tray before setting the paper selection lever.

¡For ink jet paper, plain paper, color ink jet paper, ink jet transparencies, or ink jet back print films, set this lever to the back position .

¡For envelopes, ink jet glossy paper, thick paper, and manual feed, set this lever to the

front position.

Front Back Paper selection lever

Note:

¡Do not move this lever after loading paper in the paper tray.

¡This lever is different from a lever on a typewriter or dot matrix printer. You need not pull it forward to load paper.

9