Setting the silent detection
This feature allows the main unit to activate the fax function automatically when a silent pause longer than 4 seconds is detected in the EXT.TAM mode.
Helpful hints:
¡If you wish to receive documents from stations that do not send a calling tone after dialing, activate this feature.
¡If you use a single cassette tape to give a greeting message and to record incoming messages, deactivate this feature.
1
2
3
4
5
6
Press (MENU).
SYSTEM SET UP
Press K, then press D @.
SILENT DETECT.
Press (START/COPY/SET).
MODE=ON [ÿŸ]
Press (‹) or (›) to select the desired mode.
Press (START/COPY/SET).
Press (MENU).
Dial keypad |
|
|
(MENU) |
1 2 3
4 5 6
7 8 9
0
(‹) |
| (›) |
| (START/COPY/SET) |
|
|
|
|
|
|
|
|
|
|
Notice when using with an answering machine
¡When the main unit receives a document, a silent pause or a fax tone may be recorded on the answering machine.
¡Advise callers that they should not pause for over 4 seconds while recording their voice messages. Otherwise, the unit may switch to the fax mode.
¡When your answering machine runs out of recording tape, the unit may not be able to receive a document. Rewind the tape to record messages.
¡When you set the answering machine to give only a greeting message, fax reception may not be available.
¡If you answer a call with the answering machine and pause for over 4 seconds, the unit may switch to the fax mode and you may not be able to talk with the other party. To resume the conversation, press (STOP) on the
main unit.
¡When the answering machine does not answer a call after 5 rings, the fax function will be activated.
¡Set the receive mode of the main unit to the TEL mode under the following conditions:
Operations | Advanced |
49