Advanced features, Programmable Features

7. Programmable Features

Code #06: Changing the ring setting in FAX ONLY mode

FAX RING COUNT

RINGS=2 [±]

To change the number of rings before the unit answers a call in FAX ONLY mode.

You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”. If you are using the unit with an answering machine, set to more than 4 (page 32).

Code #12: Enabling remote operation for an answering machine

REMOTE TAM ACT.

=OFF [±]

If you are using the unit with an answering machine, activate this feature, and program the remote activation ID to enable remote operation of the answering machine.

1.Press {MENU}.

2.Press {#} then {1}{2}.

3.Press {A} or {B} repeatedly to select “ON”.

4.Press {SET}.

5.Enter your ID from 1 to 5 digits, using 0–9,

{*} and {#}.

L The default ID is “11”.

6.Press {SET}.

7.Press {MENU}.

Code #13: Setting the dialling mode (For Australian users only)

DIALLING MODE

=TONE [±]

If you cannot dial, change this setting depending on your telephone line service. “TONE”(default): For tone dial service.

“PULSE”: For rotary pulse dial service.

Code #17: Setting the ringer pattern

RINGER PATTERN

=A[±]

You can select “A” (default), “B” or “C”.

7.3 Advanced features

Code #22: Setting the journal report to print automatically

AUTO JOURNAL

=ON[±]

“ON” (default): The unit will print a journal report automatically after every 30 new fax communications (page 27).

“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax communications.

Code #23: Sending documents overseas

OVERSEAS MODE

=ERROR [±]

If you have difficulty sending an overseas fax, activate this feature before starting transmission.

LThis feature is not available for broadcast

transmission.

LThe calling charge may be higher as the transmission speed is slowed down.

“NEXT FAX”: This setting is effective only for the next attempted fax transmission. After transmission, the unit will return to the previous setting.

“ERROR” (default): When the previous fax transmission fails and you wish to re-send the document automatically.

“OFF”: Deactivates this feature.

Code #25: Sending a fax at a specific time

DELAYED SEND

=OFF [±]

This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.

To send a document:

1.Insert the document.

2.Press {MENU}.

3.Press {#} then {2}{5}.

4.Press {A} or {B} repeatedly to select “ON”.

5.Press {SET}.

6.Enter the fax number.

7.Press {SET}.

8.Enter the transmission start time.

LPress {*} repeatedly to select “AM” or “PM”.

9.Press {SET}.

LTo cancel after programming, press {STOP} then {SET}.

Code #26: Setting the Caller ID list to print automatically

AUTO CALL. LIST