7. Programmable Features
“ON” (default): The unit will print the Caller ID list automatically after every 30 new calls (page 23). “OFF”: The unit will not print the Caller ID list, but keep a record of the information for the last 30 callers.
Code #31: Activating the Distinctive Ring feature
DISTINCTIVE RING
=OFF [±]
See page 34 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON[±]
To receive a fax document that is longer than your recording paper.
“ON” (default): The unit will fit received documents onto your recording paper. “OFF”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON[±]
If you use an extension telephone and wish to use it to receive a fax, activate this feature and program the activation code.
LThis code is also used to receive a voice message and a fax in the same call (page 32).
1.Press {MENU}.
2.Press {#}, then {4}{1}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your code from 2 to 4 digits, using
{*} and {#}.
L The default code is “;#9”. L Do not enter “0000”.
6.Press {SET}.
7.Press {MENU}.
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON[±]
To alert you with a beeping sound when a received fax document is stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and make sure the unit is supplied with enough paper to print the stored document.
“ON” (default): You will hear a beeping sound.
“OFF”: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON[±]
To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). “ON” (default): You do not have to press {FAX START} for fax reception.
“OFF”: You have to press {FAX START} for fax reception.
Code #58: Setting the original mode
ORIGINAL
=NORMAL [±]
To send or copy a document with faint or dark writing, set this feature before starting transmission or copying.
“NORMAL” (default): Used for normal writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
Code #68: Setting the Error Correction Mode (ECM)
ECM SELECTION
=ON[±]
This feature is available when the transmitting/receiving fax machines are ECM compatible.
“ON” (default): To send a fax even if there is static interference on the telephone line.
“OFF”: Deactivates this feature.
Code #74: Setting the location where you use this unit
LOCATION =AUSTRALIA [±]
This setting must match your location.
“AUSTRALIA” (default): To use in Australia.
“NEWZEALAND”: To use in New Zealand.
Code #76: Setting the connecting tone
CONNECTING TONE
=ON[±]
If you often have trouble when sending faxes, this feature allows you to hear connecting tones;
39
