7. Programmable Features
fax tone, ring back tone and busy tone. You can use those tones to confirm the status of the other party’s machine.
LIf the ring back tone continues, the other party’s machine may not be a facsimile or may have run out of paper. Check with the other party.
LThe connecting tone volume cannot be adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
Code #79: Setting toner save feature
TONER SAVE
=OFF [±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Code #80: Resetting advanced features to their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1.Press {MENU}.
2.Press {#}, then {8}{0}.
3.Press {A} or {B} repeatedly to select “YES”.
4.Press {SET}.
5.Press {SET} again.
6.Press {MENU}.
LThe location setting (feature #74, page 39) will not be reset.
7.4Direct commands for programming features
You can also select the desired setting by directly entering the program code (# and a
1Press {MENU}.
2Press {#} and the
3Press the desired direct command, using the dial keypad, to display the desired setting. L This step may be slightly different
depending on the feature.
4Press {SET}.
5To exit programming, press {MENU}.
Program code and direct command key
{#}{0}{1} Date and time
LEnter the date and time using the dial keypad (see page 18 for details).
{#}{0}{2} Your logo
LEnter your logo using the dial keypad (see page 19 for details).
{#}{0}{3} Your fax number
LEnter your fax number using the dial keypad (see page 20 for details).
{#}{0}{4} Sending report
–{1}:“ON”
–{2}:“OFF”
–{3}:“ERROR” (default)
{#}{0}{6} Fax ring count
–{2}:“2” (default)
–{3}:“3”
–{4}:“4”
–{5}:“5”
–{6}:“6”
–{7}:“7”
–{8}:“8”
–{9}:“9”
{#}{1}{2} Remote activation ID
–{1}:“ON”
–{2}:“OFF” (default)
LIf you select “ON”, then enter your ID from 1 to 5 digits using
{#}{1}{3} Dialling mode
–{1}:“PULSE”
–{2}:“TONE” (default)
{#}{1}{7} Ringer pattern
–{1}:“A” (default)
–{2}:“B”
–{3}:“C”
{#}{2}{2} Journal report
–{1}:“ON” (default)
–{2}:“OFF”
{#}{2}{3} Overseas mode
–{1}:“NEXT FAX”
–{2}:“OFF”
–{3}:“ERROR” (default)
{#}{2}{5} Delayed transmission
–{1}:“ON”
–{2}:“OFF” (default)
LIf you select “ON”, then enter the fax number and transmission time using the dial keypad (see feature #25 on page 38 for details).
{#}{2}{6} Caller ID list
–{1}:“ON” (default)
–{2}:“OFF”
40
