Panasonic KX-HCM230 operating instructions Making holes on mortar wall

Operating Instructions

Making holes on mortar wall

1.Put Flexible Stand on the wall where you plan to install Network Camera and mark the points where you are going to make holes.

2.Make holes with an electric drill. Insert plastic plugs (customer provided) into the holes and push them inside the holes with the hammer.

	Plastic Plug
	Hammer
Change the drill depending on the	Caulk around the holes
concrete wall or the tiled wall.	if necessary.

Note

Mortar wall is easy to come off in drilling.

3.Mount the Flexible Stand by using the screws (accessories).

100