Panasonic KX-HCM230 operating instructions Network Camera Cabling, DC Plug

Operating Instructions

4.1.1 Network Camera Cabling

Check the location where Network Camera should be installed. Select the proper cable suited to Network Camera location. Consult an authorized wiring electrician for cabling.

1.Put the cables through the Connector Cover (1.). Connect the DC plug of the AC adaptor to the DC IN jack (2.) and Category 5 straight/cross cable to the Ethernet port (3.). Connect the AC plug of the AC adaptor to the power outlet (4.).

	(4.)
AC adaptor
Connector	Power
	Outlet
Cover

DC IN jack

Ethernet port

Notes

(1.)

(2.)

DC Plug To Network

(3.)

Category 5 straight/cross cable

•Mounting and cabling instructions described in this Operating Instructions follow generally accepted guidelines suitable for residential installations. In some areas, commercial and industrial installations are regulated by local or state ordinances. For such installations, contact your local building department or building inspector for more details.

•External I/O and Ground should be threaded through Connector Cover. Once you putty the cables, External I/O and Ground cannot be connected until you take the putty off.

•Check the location of Network Camera, the type and the length of the Ethernet cable (Max. 100 m [330 feet]). Use an Ethernet cable as short as possible for outdoor use. Lightning may cause serious damage to Network Camera or the connected devices.

•Use a category 5 cross cable when connecting directly to a PC.

[For assistance, please call: 1-800-272-7033] 93